Key Table: Baum Vario Pro

The display keys are at both ends of the text cell area. From top to bottom:
* The three at the left are named Display1 through Display3.
* The three at the right are named Display4 through Display6.
The wheels on the display module are identified by their ordinal position
(first through fourth) from the left.
The larger controls on the status module, from left to right,
are named StatusButton1 through StatusButton4.
The smaller controls on the status module, from left to right,
are named StatusKey1 through StatusKey4.

Default Bindings
go left one window: Display2
go right one window: Display5
go left one character: Display1+Display3
go right one character: Display4+Display6
go to beginning of line: Display1+Display2+Display3
go to end of line: Display4+Display5+Display6
go up one line: Display4
go down one line: Display6
go to top line: Display1+Display4
go to bottom line: Display3+Display6
go to beginning of top line: Display2+Display4
go to beginning of bottom line: Display2+Display6
go up to nearest line with different content: Display5+Display4
go down to nearest line with different content: Display5+Display6
go up to nearest line with different highlighting: Display2+Display1
go down to nearest line with different highlighting: Display2+Display3
go up to previous command prompt: Display2+Display5+Display1+Display4
go down to next command prompt: Display2+Display5+Display3+Display6
go up to last line of previous paragraph: Display2+Display5+Display4
go down to first line of next paragraph: Display2+Display5+Display6
search backward for cut text: Display2+Display4+Display6+Display1
search forward for cut text: Display2+Display4+Display6+Display3
set cursor tracking on: Display1
set cursor tracking off: Display3
go back after cursor tracking: Display1+Display6
go to cursor: Display2+Display4+Display6
go to current speech position: Display1+Display3+Display5
bring cursor to line: Display1+Display3+Display4+Display6
enter/leave status display: Display2+Display5
set display mode attributes/text: Display1+Display4+Display5
freeze/unfreeze screen image: Display1+Display2+Display4
enter/leave help display: Display1+Display2+Display5
enter/leave preferences menu: Display1+Display3+Display4
insert cut text at cursor: Display1+Display2+Display3+Display4
restore preferences from disk: Display1+Display2+Display3+Display5
restart speech driver: Display2+Display3+Display4
set attribute underlining on/off: Display2+Display3+Display4+Display5
save preferences to disk: Display2+Display4+Display5+Display6
set text style 6-dot: Display2+Display3+Display5
set text style 8-dot: Display2+Display3+Display6
enter/leave command learn mode: Display1+Display4+Display5+Display6
switch to next virtual terminal: Display1+Display2+Display3+Display6
switch to previous virtual terminal: Display3+Display4+Display5+Display6
stop speaking: Display3+Display4
speak current line: Display3+Display5
speak from top of screen through current line: Display3+Display5+Display4
speak from current line through bottom of screen: Display3+Display5+Display6
set autospeak on/off: Display3+Display4+Display6
go up one line: FirstWheelUp
go down one line: FirstWheelDown
go to cursor: FirstWheelPress
go up one line: SecondWheelUp
go down one line: SecondWheelDown
go to cursor: SecondWheelPress
go up one line: ThirdWheelUp
go down one line: ThirdWheelDown
go to cursor: ThirdWheelPress
go up one line: FourthWheelUp
go down one line: FourthWheelDown
go to cursor: FourthWheelPress
enter/leave help display: StatusButton1
enter/leave command learn mode: StatusButton2
enter/leave status display: StatusButton3
enter/leave preferences menu: StatusButton4
set cursor visibility on/off: StatusKey1
set attribute underlining on/off: StatusKey2
freeze/unfreeze screen image: StatusKey3
set text style 6-dot/8-dot: StatusKey4
bring cursor to character: RoutingKey
start new cut buffer at character: Display1+RoutingKey
append to existing cut buffer from character: Display2+RoutingKey
linear cut to character: Display4+RoutingKey
rectangular cut to character: Display5+RoutingKey
copy characters to cut buffer: RoutingKey+RoutingKey
append characters to cut buffer: Display2+RoutingKey+RoutingKey
describe character: Display3+RoutingKey
place left end of window at character: Display6+RoutingKey
go up to nearest line with less indent than character: Display2+Display1+RoutingKey
go down to nearest line with less indent than character: Display2+Display3+RoutingKey
go up to nearest line with different character: Display5+Display4+RoutingKey
go down to nearest line with different character: Display5+Display6+RoutingKey
remember current window position: Display1+Display3+RoutingKey
go to remembered window position: Display4+Display6+RoutingKey